Skip to main content
Version: 5.33

Display

1. Overview​

A correctly set up display shows the following information to EV drivers while the charging is in progress:

  • Charging time
  • Energy
  • Power

1.1. Goal​

  • Activate a display that has already been wired up to a Charge Controller
  • Get an overview over what type of information is displayed
  • Changing languages
  • How to set up a single display with 2 Charge Controllers (Master-Slave)

2. Hardware​

The DPM2x16FP Display-Module is meant to be used with the CC613 Charge Controller. It visualizes the status by being integrated in the charging station.

2.1. Associated equipment​

2.2. Installation​

The Display module can be connected to the charge controller using a standard RJ45 cable. The second RJ45 cable interface socket is used to connect to the RFID module. The CC612 and the RFID module can be connected using either RJ45 cable interface socket. The RJ45 sockets are interchangeable.

3. Relevant configuration options​

Ifandset Type of Display to
No display is in useDisplay not configured
A display is connectedyou don't want the display to show informationDisplay not in use
you want the display to show informationBender LCD-Module DPM2x16FP

3.1. Changing the display language​

  1. Apply the following configuration:

Location in Legacy Config UIParameterValueInfo
OperatorLanguage of Display EnglishShows the information in English
Deutsch/GermanShows the information in German
Multi-Language EN-DE-FR-NL-IL>Shows the info in different languages by alternating the messages shown on the display
  1. At the bottom of the Config UI, click , then click to apply the changes

3.2. Configuring the display on Master-Slave and Standalone Charging Stations​

Location in Legacy Config UIParameterValueInformation shown
ManufacturerMode for Display MainThe Displays shows the information of the Master Charge Controller
Master-SlaveThe Display is in split mode. Information of both Charge Controllers displayed at the same time

3.3. Changing what information is displayed​

if you want this to be shown on the displayset this value
Display charging time On
Display energy On
Display power On
Last updated on