IPM1300 Integrated Power Module
- 22 kW power relay (32 A / 400 V)
- Surge protection device (SPD)
- Integrated DC power supply (also for charge controller)
- Measuring current transformer for DC residual current monitoring
- Integrated temperature sensor
- 20-pin plug for connection to the charge controller via ribbon cable (included)
- Protective conductor monitoring (PE monitoring)
Integrated power module IPM1300 for use with the ICC1314 charge controller
The IPM1300 is the perfect addition to build a compact charging station or wallbox. With its dimensions of just 120 mm x 130 mm, it harmonises ideally with the ICC1314 charge controller, enabling the construction of compact charging stations.
The power module of the IPM1300 contains an integrated power supply unit that is also used for the charge controller, so that no additional DC power supply is required. In addition, 3 watts are available for additional applications. It can be used for charging systems with a charging capacity of up to 22 kW.
The integrated measuring current transformer is analysed via the charge controller. Together, the transformer and the charge controller form a 6 mA DC fault current detection system in accordance with IEC 62955. The IPM1300 also monitors the protective earth (PE) connection and the 3-phase system.
An internal temperature sensor records the current PCB temperature and enables the charge controller to adjust the charging current depending on the temperature. The monitoring of the load relay (weld check) is also integrated in the power module.
- 22 kW power relay (32 A / 400 V)
- Surge protection device (SPD)
- Integrated DC power supply (also for charge controller)
- Measuring current transformer for DC residual current monitoring
- Integrated temperature sensor
- 20-pin plug for connection to the charge controller via ribbon cable (included)
- Protective conductor monitoring (PE monitoring)
Integrated power module IPM1300 for use with the ICC1314 charge controller
The IPM1300 is the perfect addition to build a compact charging station or wallbox. With its dimensions of just 120 mm x 130 mm, it harmonises ideally with the ICC1314 charge controller, enabling the construction of compact charging stations.
The power module of the IPM1300 contains an integrated power supply unit that is also used for the charge controller, so that no additional DC power supply is required. In addition, 3 watts are available for additional applications. It can be used for charging systems with a charging capacity of up to 22 kW.
The integrated measuring current transformer is analysed via the charge controller. Together, the transformer and the charge controller form a 6 mA DC fault current detection system in accordance with IEC 62955. The IPM1300 also monitors the protective earth (PE) connection and the 3-phase system.
An internal temperature sensor records the current PCB temperature and enables the charge controller to adjust the charging current depending on the temperature. The monitoring of the load relay (weld check) is also integrated in the power module.
Features
- Integrated DC power supply via AC mains connection, no separate power supply required
- Can be used for charging systems up to 22 kW in single-phase or three-phase grids up to 3x 32 A, charge controller controls charging process and main relay
- Integrated residual current transformer; offers 6 mA DC residual current detection in accordance with IEC 62955 with the ICC1314 charge controller
- Monitoring of the protective conductor or PE connection without additional wiring
- Monitoring of the 3-phase system: Errors in the rotating field are analysed in the charge controller
- Additional temperature sensors to adjust the charging current depending on the temperature
- Adds a three-phase power relay to the charge controller
- Integrated monitoring of the weld check with an evaluation in the charge controller
- Dimensions: 130 mm x 120 mm
Applications
AC charging stations for electric vehicles, wallboxes, single and double charging stations
IPM1300 Integrated Power Module Variant(s)
| Type | Art. No. |
|---|---|
| IPM1300 | B94060198 |
Only for use with the following ICC1314 charge controller variants
| Type | USB | 4G modem | Ethernet | WiFi | PLC* | Isolated entrance | 12 V relay output | Art. No. |
|---|---|---|---|---|---|---|---|---|
| ICC1314-Connect Plus-G1 | 2x (type A) 1x (type B) | ✓ (Cat 1) | 2 | ✓ | ✓ | 2 | 2 | B94060030 |
| ICC1314-Companion-G1 | 1x (type A) 1x (type B) | -- | -- | -- | ✓ | 2 | 2 | B94060031 |
* Powerline Communication according to ISO/ IEC15118